EZ-Bend® Indoor 和 Outdoor Cable 解决方案
With EZ-Bend Ruggedized Cables, users have exp和ed options for MDU, in-home wiring 和 aggressive, space-constrained routing environments. When a low profile 和 durability are needed, select the 3.0毫米产品. For more dem和ing deployments, the EZ-Bend 4.8 Ruggedized Cable is ideal. EZ-Bend加固电缆专为室内安装而设计, outdoor 和 inside risers. 这些电缆可以绕过尖锐的角落,并使用传统的快速简便的安装方法进行装订, with negligible signal loss, 和 are available with a complete set of terminals, modules 和 cables for any type of building 和 living unit.
EZ-Bend Ruggedized Cable
![EZ-BEnd 光纤电缆](http://fssaqx.jhhnyb.com/wp-content/uploads/EZ-Bend-Knot.jpg)
- EZ-Bend G.657.B3 光纤 with a 2.5mm bend radius -twice as tight as the industry st和ard.
- backwards compatible with G.652.D纤维,
- 提供工厂连接和测试组件或盒装卷轴,
- 3.0毫米或4毫米.8mm diameter ruggedized cordage including a tonable option,
- 100 lb pull tension, enabled by aramid strength members
- rated for indoor distribution, outdoor including underground 和 risers,
- can be secured using zip ties, staples or clips,
- 通风箱和双等级低烟零卤(LSZH)结构,防火等级包括UL, Plenum 和 Europe CPR (Construction 产品 Regulation) certification
![](http://fssaqx.jhhnyb.com/wp-content/uploads/ezbend-why-choose.jpg)
EZ-Bend Ruggedized Cables are used in the following applications:
- 减少电缆: Underground drop cable options include the single fiber EZ-Bend 3.0 mm和4.8 mm Ruggedized Cables 和 EZ-Bend Toneable Cables. 可调谐电缆可以轻松地在地面上定位埋地电缆,以帮助避免在安装其他地下系统时切割电缆. 这些电缆是从架空终端沿电线杆向下安装到地面的, 和 are then buried to minimize disruption to l和scaping, or pulled into existing duct. 然后将电缆连接到安装在房屋一侧的分界盒中, ideally in a location close to the Optical Network Terminal (ONT) on the
- Multifiber Drop Bundles:多光纤下拉包提供了额外的好处,节省了安装时间, 6 or 12 assemblies at one time. These Multifiber Drop Bundles feature the ruggedized 4.8 mm Indoor/Outdoor cable 和 are placed on the outside of the building. 线圈位于生活单元的每个窗口,其中每个单独的连接端将通过连接到ONT的窗口密封进入生活单元. 束的未连接端被拼接成光纤分配终端(FDT)。, located at either ground level or on top of the building.
- Ruggedized Assemblies or CordageEZ-Bend加固组件是工厂连接的电缆,设计用于承受钉接,同时显示可忽略不计的弯曲损失,有助于节省安装时间和金钱. 创新的设计克服了尖锐的角落,而无需弯曲管理,是MDU室内和室外滴连接到生活单元内的ONT的理想选择, or for drop cabling to 和 into homes or commercial buildings. 另一方面, EZ-Bend加固电缆也可批量购买,当安装人员更喜欢使用现场拼接或机械连接器的融合拼接来切割定制长度时,可以使用卷轴-in- in- box.
EZ-Bend Frequently Asked Questions
1. 使用特别设计的弯曲不敏感光纤电缆进入住宅或办公室有什么好处?
Many factors can create a loss in an optical fiber. One of the main factors is tight bends. When optical fiber is bent below a certain radius, 核心中的光不再在光纤的核心中被引导,从而产生损耗,从而降低互联网速度和流媒体应用程序或完全关闭服务.
EZ-Bend has the lowest tight bending loss performance in the industry.
2. Why is the bend sensitivity of optical fiber a concern today?
With the advent of fiber-to-the-home (FTTH), fibers today are being installed in new pathways – for example, 在门框和墙钉周围,它们被安装人员像铜一样弯曲和钉住, some with no previous fiber experience. 新的应用使用先进的粘合剂来附着纤维并在角落周围布线.
EZ-Bend可以在尖锐的拐角处装订和弯曲,其强度是竞争对手的两倍,低至2倍.弯曲半径5mm.
3. 安装人员需要注意哪些典型的弯曲应力?
Some of the inducers of stress that lead to signal loss include:
- Stapling around sharp corners
- 拉
- Rodding 和 pulling through duct
- 推
- Direct buried installation
EZ- Bend when installed properly reduces these losses.
4. Are there optical fibers available that minimize the loss in tight bends?
Yes, EZ-Bend 光纤s do. 特殊的OFS实验室专利纤芯设计大大提高了EZ-Bend光纤在安装过程中或安装后发生弯曲时的弯曲性能.
5. 什么弯曲不敏感的光缆是专门为住宅使用而设计的?
Once the fiber enters reaches the home 和 enters the residence, the customer typically dictates the terms, 和 bends can become unmanaged. 符合光缆周围的紧密角落周围的一个家的基础, 在家里, 或者在公寓里不使用昂贵的不美观的弯曲管理是客户的强烈首选, 和 much easier for installers to deploy. For these applications, OFS offers EZ-Bend Ruggedized Cable 和 cable assemblies, 和 the InvisiLight® Optical Solution for inside living unit deployments. 所有EZ-Bend布线解决方案和InvisiLight解决方案都使用EZ-Bend光纤, which is superior to 和 compliant with the ITU-T G.657.B3推荐. EZ-Bend光纤在需要的地方提供超弯曲不灵敏度(通常是包裹房屋), 在家里, or in apartments in mass FTTH deployments). These cables may be run around the many sharp corners along a hallway, around windows 和 door frames, 和 along other pathways with significant numbers of very tight bends. 电缆可以通过订书机固定,对于InvisiLight Solution,也可以使用专门设计的粘合剂固定.
EZ-Bend® Single-Mode 光纤 Brochure
6. 使用特别设计的弯曲不敏感光纤电缆进入住宅或办公室有什么好处?
OFS EZ-Bend加固电缆和电缆组件为任何寻求连接家庭和mdu用户的通信服务提供商提供了差异化的解决方案.
福利包括:
- 简单的低技能安装光纤从路边和进入家庭到室内ONT.
- 与微管道系统和室内装饰相比,每户使用更经济.
- 可以节省额外的钱:不需要从外部过渡到内部的围栏.
- 改进的Wi-Fi覆盖范围:轻松过渡到电缆内部的InvisiLight光纤,以到达生活单元内部的最佳位置.
- 也许装订和弯曲的尖角是最好的竞争对手的两倍,减少到2.弯曲半径5mm.
- Best bending loss performance in the industry compared to competitor’s G.657B光纤电缆.
- 自2009年以来,由6个一级服务提供商连接的超过400万个生活单位(和一些企业)的可靠性能, dozens of Tier 2 和 3
下面的EZ-Bend加固电缆和电缆组装视频是一个全面的安装指南.
OFS还可以提供EZ-Bend和InvisiLight解决方案各方面的实时虚拟培训!
7. What about fusion splicing bend-insensitive fibers?
OFS还可以提供EZ-Bend和InvisiLight解决方案各方面的实时虚拟培训!
8. Who is using EZ-Bend cabling 和 InvisiLight 解决方案 today?
自2009年推出EZ-Bend电缆以来,北美和欧洲的多个一级通信服务提供商已经为数百万用户部署了EZ-Bend电缆和InvisiLight解决方案.
Downloads 和 Resources
- EZ-Bend Ruggedized Assemblies
- EZ-Bend 3.0mm Ruggedized Assemblies
- EZ-Bend 3.0mm落差电缆
- EZ-Bend 4.8mm落差电缆
- EZ-Bend Tonable Drop Assemblies
- EZ-Bend 4.8mm可调I/O电缆
- EZ-Bend Multifiber Drop Bundle
- EZ-Bend Optical Technology
- EZ-Bend vs Single Mode Fiber Installations